Gunstock MagTube ForceTube Switch Side EN Test

MAGTUBE & FORCETUBE GUN STOCK RIGHT TO LEFT SWITCH SIDE

Hello, fellow gamer!

If you are reading this, you laid your hands on one of our Gun Stocks.

MagTube Rifle, with Classicstatic Stock.

stock.
Or

ForceTube Rifle, with Haptichaptic Recoilrecoil Stock.stock.

For botheither of them, you will useneed to follow the same following steps to change the primarytrigger hand of your Gun Stock.gunstock. The images represent a classicMagTube with static MK1 Stock, but this is the same for a ForceTubeMagTube Hapticwith Stock.

MK2

We invite you to join our Discord community for any questionstock or directlyForceTube contactwith ushaptic through our support service on our website.stock.

 

Switching the sidelaterality of your MagTube / ForceTube Gunstockgunstock should take 20min.20 min.

For video setup, you can check our YouTube Playlists.

First, makeMake sure you work in a clear area and be very careful, some parts can be lost easily.

STEP 1: RIGHT TO LEFT-HANDED / REAR SIDE

________________________________________________________________________________________________________________________________________________

For steps 1 & 2, if you want to switch from left-handed to right-handed, you just need to change the way of the magnetic supports are mounted.

 

STEP 1: REAR SIDE / Right to left-handed 

________________________________________________________________________________________________________________________________________________

You will need the provided tools (Allen key) to complete this step.

 

Unscrew the connection on the medium tube closest to the longer tube.	Remove the screw and bolt (keep them safely as not to lose them).	Remove the longer tube with the connections.
By loosening the butterfly screw, slide the magnetic bracket attachment out.	Flip the magnetic bracket attachment.	Put it back on the other way like shown. And tighten the butterfly screw to hold it in place (not too much, you may need to adjust it later).
Put the connection back on the tube.	The screw and bolt as well.	Tighten the screw but not too much, you will need to adjust the gunstock once you're done.

STEP 2: RIGHTFRONT TO LEFT-HANDEDSIDE / FRONTRight SIDEto left-handed

________________________________________________________________________________________________________________________________________________

  

By loosening the lower butterfly screw, slide the magnetic bracket attachment out.	Flip the magnetic bracket attachment.	Put it back on the other way like shown. And tighten the butterfly screw to hold it in place (not too much, you may need to adjust it later).

STEP 3: ADJUSTMENTS

________________________________________________________________________________________________________________________________________________

Bend all the connections at an angle of 90° so that the MagTube Rifle almost forms a square	Adjust the medium tube with the top of the stock and tighten a bit more the screw.	Adjust the long tube with the rear of the butt and tighten a bit more the screw.

STEP 4: FINAL TOUCH

________________________________________________________________________________________________________________________________________________

You can magnetically attach the MagCups to the black magnetic supports. Make sure the logo on the cups are facing the front of the Rifle.

Congratulations! Your MagTube rifle is now on the other side! As a reminder, if you just got it, your MagTube/ForceTube will highly improve your freedom, reaction time, aiming and efficiency after some training. It may take some time to get used to. Thank you for choosing the best Virtual Reality stock rifle solution. But don’t take our word for it, try it. And most importantly, enjoy your games!