Skip to main content

Gunstock MagTube ForceTube Switch Side EN Test

image.png

MAGTUBE & FORCETUBE GUN STOCK RIGHT TO LEFT SWITCH SIDE

Hello, fellow gamer!

If you are reading this, you laid your hands on one of our Gun Stocks.

MagTube Rifle, with Classic Stock.

Or

ForceTube Rifle, with Haptic Recoil Stock.

For both of them, you will use the same following steps to change the primary hand of your Gun Stock. The images represent a classic Stock, but this is the same for a ForceTube Haptic Stock.

We invite you to join our Discord community for any question or directly contact us through our support service on our website.

image.png

Switching the side your MagTube / ForceTube Gunstock should take 20min.

For video setup, you can check our YouTube Playlists.

First, make sure you work in a clear area and be very careful, some parts can be lost easily.

 

STEP 1: RIGHT TO LEFT-HANDED / REAR SIDE

________________________________________________________________________________________________________________________________________________

For steps 1 & 2, if you want to switch from left-handed to right-handed, you just need to change the way of the magnetic supports are mounted. You will need the provided tools (Allen key) to complete this step.

image.png

Unscrew the connection on the medium tube closest to the longer tube.

image.png

Remove the screw and bolt

(keep them safely as not to lose them).

image.png

Remove the longer tube with the connections.

image.png

By loosening the butterfly screw, slide the magnetic bracket attachment out.

image.pngimage.png image.png

Flip the magnetic bracket attachment. 

image.png

Put it back on the other way like shown.

And tighten the butterfly screw to hold it in place (not too much, you may need to adjust it later).

image.png

Put the connection back on the tube. 

image.png

The screw and bolt as well.

image.png

Tighten the screw but not too much, you will need to adjust the gunstock once you're done.

 

STEP 2: RIGHT TO LEFT-HANDED / FRONT SIDE

________________________________________________________________________________________________________________________________________________

image.png

By loosening the lower butterfly screw, slide the magnetic bracket attachment out.

image.png image.png image.png

Flip the magnetic bracket attachment. 

image.png

Put it back on the other way like shown.

And tighten the butterfly screw to hold it in place (not too much, you may need to adjust it later).

 

STEP 3: ADJUSTMENTS

________________________________________________________________________________________________________________________________________________

image.png

Bend all the connections at an angle of 90° so that the MagTube Rifle almost forms a square

image.png

Adjust the medium tube with the top of the stock and tighten a bit more the screw.

image.png

Adjust the long tube with the rear of the butt and tighten a bit more the screw.

 

STEP 4: FINAL TOUCH

________________________________________________________________________________________________________________________________________________

 

You can magnetically attach the MagCups to the black magnetic supports.

Make sure the logo on the cups are facing the front of the Rifle.

image.png

Congratulations!

Your MagTube rifle is now on the other side!

As a reminder, if you just got it, your MagTube/ForceTube will highly improve your freedom, reaction time, aiming and efficiency after some training. It may take some time to get used to.

Thank you for choosing the best Virtual Reality stock rifle solution. But don’t take our word for it, try it. And most importantly, enjoy your games!

 

 

 

Back to top