Skip to main content

ProTas Setup EN Test

The ProTas allows you to increase your comfort while playing flying games or simulators and hold your controllers as if you were in a spaceship or airplane, or even a mecha.

image.png Installing your ProTas should take 3 minutes.

Make sure you work in a clear area and be very careful. Some parts can easily be lost.

Parts list

....................................................................................................................................................................................................................................................................................

Tool bag
image.png
 image.png
x1 x1
Hex Key 0,4cm Hex Key 0,25cm

For ProTas pair (2 ProTas & 2 cups)

....................................................................................................................................................................................................................................................................................

Rest of the box
image.png
 image.png
 image.png
 image.png
 image.png
 image.png
 image.png
 image.png
x2 x2 x2 x2 x2 x2 x4

x2
Base Flex part Magnetic support 20mm screw Nut Pad Scratch Strap Pair of cups

 

For ProTas solo (1 Protas & 1 cup)

....................................................................................................................................................................................................................................................................................

Rest of the box
image.png
 image.png
 image.png
 image.png
 image.png
 image.png
 image.png
 image.png
x1 x1 x1 x1 x1 x1 x2

x1
Base Flex part Magnetic support 20mm screw Nut Pad Scratch Strap Pair of cups

For ProTas base (without cup)

....................................................................................................................................................................................................................................................................................

Rest of the box
image.png
 image.png
 image.png
 image.png
 image.png
 image.png
 image.png
x1 x1 x1 x1 x1 x1 x2
Base Flex part Magnetic support 20mm screw Nut Pad Scratch Strap

 

Mounting

________________________________________________________________________________________________________________________________________________

image.png                                                           image.png                                                      image.png

Assemble the ProTas and the MagCup using the magnets on each part.

________________________________________________________________________________________________________________________________________________

image.png                                            image.png                                                   image.png

                 image.png                                                                                image.png                                                                         image.png

Adjust the magnetic bracket to make it comfortable when you play (you can always re-adjust it later).

________________________________________________________________________________________________________________________________________________

image.png  

Tighten the screw with the provided Allen key.

________________________________________________________________________________________________________________________________________________

image.png      

Release the straps and set them apart from each side, and remove the plastic protection from the pad.

________________________________________________________________________________________________________________________________________________

image.png

Attach the ProTas to your armchair with the pad and the straps (for more stability), or on your desk with the sticky pad.

________________________________________________________________________________________________________________________________________________

image.png

Insert your controller into the magnetic cup and play.

Tips

....................................................................................................................................................................................................................................................................................

  • You can play games feeling like in a cockpit and take off the cup with the controller at any time if you need to. A simple wrist rotation suffice to detach the magnetic cup.
  • You can clean up the sticky pad with water if it is dusty. That way, once well dried, it will be good as new and sticky again.
  • The ProTas can be used on any support that you like (desk, coffee table, chair with armres, etc.).

Back to top