ProSaber Mounting EN Test

You got your hand on one of our ProSabers. With it, you will be able to play in Darth Maul mode in Beat Saber and similar games, or use it a paddle for kayaking.

  Mounting your ProSaber should take 10 minutes.

First, make sure you work in a clear area and be very careful. Some parts can easily be lost.

Parts list

________________________________________________________________________________________________________________________________________________

ProSaber bag
x2	x2	x1
Nut	20mm screw	Hex Key 0,4cm

Rest of the box
x2	x1	x2
Left & Right Fastened Cup	Tube 300mm chrome or carbon	Connection with internal notches

Mounting

________________________________________________________________________________________________________________________________________________

1 – First, make sure you have everything you need to mount your ProSaber.

________________________________________________________________________________________________________________________________________________

2a – The screw needs to go on the cup and the nut on the internal notched connection.

________________________________________________________________________________________________________________________________________________

2b – If you are having trouble inserting the screw on the cup, you can use the Hex key to screw it in.

________________________________________________________________________________________________________________________________________________

2c – The nut needs to go on the internal notched connection.

________________________________________________________________________________________________________________________________________________

3 – Before tightening the screw, make sure it is aligned with the tube (example for Quest 2). It is preferable to put the controller in the cup to better realize this. (note to Tao: the yellow lines are multiple images on top, and therefore I cannot reproduce this as is.) 

________________________________________________________________________________________________________________________________________________

4 – Tighten the screw using the provided Hex key.

________________________________________________________________________________________________________________________________________________

5 – Make sure to tighten it strongly so the cup won’t move at all. (note to Tao: the red circle is another image, I cannot reproduce this as is) 

________________________________________________________________________________________________________________________________________________

Do this with the other cup. You now have a fully functioning ProSaber!

________________________________________________________________________________________________________________________________________________

6 – Finally, insert the controllers in the cups, make sure to push them enough so they stay in. Enjoy this Darth Maul mod Saber.

________________________________________________________________________________________________________________________________________________

Controllers Security

________________________________________________________________________________________________________________________________________________

Pass the controller’s wrist strap into the cup’s hole

________________________________________________________________________________________________________________________________________________

Pass the controller into the wrist strap

________________________________________________________________________________________________________________________________________________

Pass the wrist strap under the cup

________________________________________________________________________________________________________________________________________________

Use the slider to tighten it on the ProSaber.

________________________________________________________________________________________________________________________________________________

Push the controller into the cup. The more you push, the more it stays in the cup. Be careful not to push too much, it might damage the controller and/or the cups

________________________________________________________________________________________________________________________________________________