Getting Started

Getting Started:

1.     After unboxing, get to know your ProSaber. If it is not assembled you will do so now following this guide pdf (prompts download). If you selected carbon tube, there should be latches bolted to the tube near each cup. These are called "strap locks". You will be using those to secure your controller straps (new method introduced with SWINGiT Golf Edition). If you selected chrome, you will be securing your straps using the pre-existing method found in tutorials.

2.     On each cup will be writing to indicate if it is for the left or right controller. Underneath either cup, where you see it bolted to the ProSaber, you might also see some more writing indicating which brand the cups are for (i.e. Quest 2). Make sure both cups are lined up properly. On carbon tube, this will be lined up with the strap locks and each other. On chrome tube, this will be lined up with each cup.

3.     Before putting your controllers into the cups, it is suggested to wipe down the part of the controllers that will go inside. This is to ensure optimal friction so they do not slide out easily. Next, observe the small hole in the cup (found on cups for most controller brands). This is intended for feeding the wrist strap through, and should be facing you, or away from the trigger button on the controller. The underneath section of the left cup that is bolted to the ProSaber should be angled towards the right; the right should be angled towards the left.

4.     To install, simply start with the wrist strap and feed it through the small hole. Then push the controller into the cup until it cannot go any further. Use of excessive force is not required as it should easily go in until it hits friction, and then with a little bit of force you should be able to continue pushing in until it won't go any further. That is the point at which you should stop and it is considered installed in the cup. Please note: if you are using Index or PSVR 2, we have videos in Website tutorials under Cup.

Securing the Wrist Straps:

1.     Follow this guide PDF (prompts download)