Setting up the MagTube

Setting up the MagTube:

1.     Once out of the bubble wrap bag, unfold the MagTube. If the tubes are not freely moving at the joints, you can use the larger of the 2 allen keys provided in a separate bag to loosen them.

2.     Observe your MagTube. There will be 2 brackets with magnets in the same shape as the ones in the cups on two separate tubes. By default, your Magtube is set up for dominant right hand use. To switch hands follow the tutorial on our website. You will also see two open ring parts, one at the very back, and another on the connector to the longest tube. These are mounting points for the sling.

3.     Install the sling on these mounting points. If you chose a 1 point sling, mount it near the back.

4.     You may put the controllers with the mag cups on the MagTube.

5.     Now take a moment to inspect your MagTube. Pay attention to where you see bolts, and black butterfly knobs. The bolts will be adjusted with the larger allen key. Loosen and tighten different things later on to adjust position and articulation to your liking. It is now ready for use!

Setting up the MagTube (Bipod):

1.     If you ordered a bipod, this is a good time to install it following our tutorial. For ease of installation, it is recommended to have both controllers off the MagTube.