Setting up the ForceTube Haptic Gunstock

Setting up the ForceTube gun stock:

1. Once out of the bubble wrap bag, unfold the ForceTube gun stock. If the tubes are not freely moving at the joints, you can use the larger of the 2 allen keys provided in a separate bag to loosen them.

2. Observe your ForceTube. There will be 2 brackets with magnets in the same shape as the ones in the cups on two separate tubes. By default, your Magtube is set up for dominant right hand use. To switch hands follow the tutorial on our website. You will also see two open ring parts, one at the very back, and another on the connector to the longest tube. These are mounting points for the sling.

3. Install the sling on these mounting points. If you chose a 1 point sling, mount it near the back.

4. You may put the controllers with the mag cups on the ForceTube. Once the Forcetube haptic module is fully charged, it is now ready for use!