Index Magcup Setup EN Test

You got your hands on the Index controller mounts (cups), for your gunstock (MagTube, ForceTube, Starter CQB) or Joystick (ProTas).

Installing your Index cups should take 3 minutes.
For video setup, you can check our YouTube Playlists.

________________________________________________________________________________________________________________________________________________

Bag N°4		Rest of the Box

X1	X1	X1
Hex Key 0,4cm	Hex Key 0,25cm	Pair of Index MagCups (left and right)

________________________________________________________________________________________________________________________________________________


Remove the controller’s straps by pressing the spring button.	Optional but recommended – You can add a wrist straps. Just make sure to put the wrist strap’s sling between the plastic part and the rubber part.

________________________________________________________________________________________________________________________________________________


Put the cup on the rounded part of the controller. Make sure to lay the back part first (magnet side) and then clip the front part with the two little bumps (spring button side).	Slide the MagCup to the hole and align it with the spring button. Put back the string of the hand strap by pressing the spring button.

________________________________________________________________________________________________________________________________________________

Your Valve Index MagCup is now ready to use. Do this with the other cup. Enjoy your games with your Index cups.

________________________________________________________________________________________________________________________________________________


Remove the controller’s straps.	Push on the two sides of the MagCup to slide it on the round part of the controller. Make sure to push out the sides enough, otherwise you may scratch your controllers.