Tutorials

• ProTas Setup EN

ProTas Setup EN

The ProTas allows you to increase your comfort while playing flying games or simulators and hold your controllers as if you were in a spaceship or airplane, or even a mecha.

Installing your ProTas should take 3 minutes.

Make sure you work in a clear area and be very careful. Some parts can easily be lost.

Parts list

....................................................................................................................................................................................................................................................................................

	Tool bag
	x1	x1
	0,4cm Hex Key	0,25cm Hex Key

For ProTas pair (2 ProTas & 2 cups)

....................................................................................................................................................................................................................................................................................

Rest of the box
x2	x2	x2	x2	x2	x2	x4	x2
Base	Flex part	Magnetic support	20mm screw	Nut	Pad	Scratch Strap	Pair of cups

For ProTas solo (1 Protas & 1 cup)

....................................................................................................................................................................................................................................................................................

Rest of the box
x1	x1	x1	x1	x1	x1	x2	x1
Base	Flex part	Magnetic support	20mm screw	Nut	Pad	Scratch Strap	Pair of cups

For ProTas base (without cup)

....................................................................................................................................................................................................................................................................................

Rest of the box
x1	x1	x1	x1	x1	x1	x2
Base	Flex part	Magnetic support	20mm screw	Nut	Pad	Scratch Strap

Mounting

________________________________________________________________________________________________________________________________________________

Assemble the ProTas and the MagCup using the magnets on each part.

________________________________________________________________________________________________________________________________________________

Adjust the magnetic bracket to make it comfortable when you play (you can always re-adjust it later).

________________________________________________________________________________________________________________________________________________

 

Tighten the screw with the provided Allen key.

________________________________________________________________________________________________________________________________________________

     

Release the straps and set them apart from each side, and remove the plastic protection from the pad.

________________________________________________________________________________________________________________________________________________

Attach the ProTas to your armchair with the pad and the straps (for more stability), or on your desk with the sticky pad.

________________________________________________________________________________________________________________________________________________

Insert your controller into the magnetic cup and play.

Tips

....................................................................................................................................................................................................................................................................................

• You can play games feeling like in a cockpit and take off the cup with the controller at any time if you need to. A simple wrist rotation suffice to detach the magnetic cup.
• You can clean up the sticky pad with water if it is dusty. That way, once well dried, it will be good as new and sticky again.
• The ProTas can be used on any support that you like (desk, coffee table, chair with arms, etc.).