Tutorials

YouTube Videos


Index Magcup Setup EN
You got your hands on the Index controller mounts (cups), for your gunstock (MagTube, ForceTube, Starter CQB) or Joystick (ProTas).  

 

 Installing your Index cups should take 3 minutes. For video setup,  you can check our YouTube Playlists . 

 

 Parts list 

 ________________________________________________________________________________________________________________________________________________ 

 

 

 

 Bag N°4 

 Rest of the Box 

 

 

 

 

 

 

 

 X1 

 X1 

 X1 

 

 

 Hex Key 0,4cm 

 Hex Key 0,25cm 

 Pair of Index MagCups (left and right) 

 

 

 

 

 Mounting 

 ________________________________________________________________________________________________________________________________________________ 

 

 

 

 

 

 

 

 

 

 

 

 Remove the controller’s straps by pressing the spring button. 

 Optional but recommended   – You can add a wrist straps. Just make sure to put the wrist strap’s sling between the plastic part and the rubber part. 

 

 

 

 ________________________________________________________________________________________________________________________________________________ 

 

 

 

 

 

 

 

 

 

 

 Put the cup on the rounded part of the controller. Make sure to lay the back part first (magnet side) and then clip the front part with the two little bumps (spring button side). 

 Slide the MagCup to the hole and align it with the spring button. Put back the string of the hand strap by pressing the spring button. 

 

 

 

 ________________________________________________________________________________________________________________________________________________ 

 

 Your Valve Index MagCup is now ready to use. Do this with the other cup. Enjoy your games with your Index cups. 

 We recommend you to keep the cups on the controllers at all time. They should not bother you when you don’t need them. 

 

 Removing 

 ________________________________________________________________________________________________________________________________________________ 

 

 

 

 

 

 

 

 

 

 

 Remove the controller’s straps. 

 Push on the two sides of the MagCup to slide it on the round part of the controller. Make sure to push out the sides enough, otherwise you may scratch your controllers. 

 

 

 

 ________________________________________________________________________________________________________________________________________________ 

 

 

 

 

 

 

 

 Unclip the MagCup by pushing on the two little bumps. 

 Put back the string of the controller’s hand strap by pushing the spring button.